Home Fort
HRFR Wire
FR PVC + HR85 PVC + conductor
HR85 PVC + conductor
Bunched Conductor
Single strand Conductor
cross section
HRFR Wire
FR PVC + HR85 PVC + conductor
HR85 PVC + conductor
Bunched Conductor
Single strand Conductor
cross section

Our range of house wires – gives a new meaning tothe term safety These Wires are coated with a specially formulated Lead free + Heat resistant + Flame retardant PVC insulation to make sure safety is never compromised.

They meet the latest requirements of IS 694:2010 in regard to flame retardation properties which translates into extra protection against electric shocks, short circuits and fires. To add to that, their special PVC compound offers high insulation resistance and dialectric strength.

3 PRO Technology

What places HomeFort in a league of its own is its unique 3PRO technology which results in three unique levels of protection:

Heat Resistant Core

While ordinary PVC can withstand a temperature upto 70oC, the HR85 PVC of HomeFort is able to bear a temperature up to 85oC. This makes HomeFort wires electrically and mechanically more stable than the rest.

TRIPLE LAYER INSULATION

Triple layer insulation leads to relatively high electric strength of the insulation with a breakdown voltage of minimum 6kV. As a different grade of PVC compound is used in every layer, the distance travelled by the leaked current is far higher. As a result the current leakage is 54-90 times lower than the values defined under the international safety standards which allow a current leakage of up to 0.75mAmps for hand held wires.

Heat Resistant & flame retardant insulation

The HRFR85 used in the skin of the wires is able to withstand a fire condition of more than 29% oxygen and a temperature index of 250oC. What’s more, HomeFort wires have self-extinguishing properties once they are directly removed from the direct source of fire, thus increasing the safety factor even further.

In addition to the three levels of protection, HomeFort comes with the following features:

ROHS compliant

HomeFort meets the standards prescribed by the European Union with regard to the restrictions on the use of hazardous substances in electrical and electronic equipment. In other words, there is no release of hazardous substances from these wires, thereby eliminating any danger to human health and to the environment.

anti-termite & anti-rodent

HomeFort wires come with termite and rodent repulsion properties, thus eliminating the possibility of short circuits that can otherwise cause tremendous loss of property and even human life.

SPECIFICATIONS

Part No. Nominal Area of Conductor No./ Nominal Diameter of Conductor strands* Nominal Thickness of Insultion Approx O.D Maximum DC Conductor Resistance Per Km @ 20oC+ current Carrying Capacity 2 cables single phase # Packing
Casing/ Trunking Unenclosed Clipped directly to a surface
(Sq.mm) (Strands/mm) (mm) (mm) (ohms/km) (Amps) (Amps)
HF2420XX 0.75 24/0.20 0.60 2.35 26.0 7 8 90 mtrs in mono boxes
HF1430XX 1.0** 14/0.30 0.70 2.75 18.1 13 14
HF2230XX 1.5** 22/0.30 0.70 3.05 12.1 15 18
HF3630XX 2.5** 36/0.30 0.80 3.70 7.41 20 24
HF5630XX 04.00 56/0.30 0.80 4.10 4.95 27 32
HF8430XX 06.00 84/0.30 0.80 4.70 3.30 35 42

insulation standards :

For 0.75, 4.0 and 6.0 sq. mm :

IS 5831 Type C (HRFR) in skin

IS 5831 Type D (FR) in Middle Layer

IS 5831 Type C (HR) in CT

For 1.0, 1.5 and 2.5 sq. mm :

IS 5831 Type C (HRFR) in skin

IS 5831 Type A (FR) in Middle Layer

IS 5831 Type C (HR) in CT

VOLTAGE GRADE :

Upto and including 1100 Volts

temperature GRADE :

-30oC to 85oC