Flexi Fort
HRFR Wire
HRFR Wire Insulation
PVC + conductor
Bunched Conductor
Single strand conductor
cross section
HRFR Wire
HRFR Wire Insulation
PVC + conductor
Bunched Conductor
Single strand conductor
cross section

Our range of Industrial wires that stands apart from the rest when it comes to safety. These wires are coated with a specially formulated Lead free + Heat resistant + Flame retardant PVC insulation to make sure safety is never compromised.

They meet the latest requirements of IS 694:2010 in regard to flame retardation properties which translates into extra protection against electric shocks, short circuits and fires. To add to that, their special PVC compound offers high insulation resistance and dialectric strength.

3 PRO Technology

What places FlexiFort in a league of its own is its unique 3PRO technology which results in three unique levels of protection:

Heat Resistant Core

While ordinary PVC can withstand a temperature upto 70oC, the HR85 PVC of FlexiFort is able to bear a temperature up to 85oC. This makes FlexiFort wires electrically and mechanically more stable than the rest.

TRIPLE LAYER INSULATION

Triple layer insulation leads to relatively high electric strength of the insulation with a breakdown voltage of minimum 6kV. As a different grade of PVC compound is used in every layer, the distance travelled by the leaked current is far higher. As a result the current leakage is 54-90 times lower than the values defined under the international safety standards which allow a current leakage of up to 0.75mAmps for hand held wires.

Heat Resistant & flame retardant insulation

The HRFR85 used in the skin of the wires is able to withstand a fire condition of more than 29% oxygen and a temperature index of 250oC. What’s more, FlexiFort wires have self-extinguishing properties once they are directly removed from the direct source of fire, thus increasing the safety factor even further.

In addition to the three levels of protection, FlexiFort comes with the following features:

ROHS compliant

FlexiFort meets the standards prescribed by the European Union with regard to the restrictions on the use of hazardous substances in electrical and electronic equipment. In other words, there is no release of hazardous substances from these wires, thereby eliminating any danger to human health and to the environment.

anti-termite & anti-rodent

FlexiFort wires come with termite and rodent repulsion properties, thus eliminating the possibility of short circuits that can otherwise cause tremendous loss of property and even human life.

SPECIFICATIONS

Part No. Nominal Cross Sectional Area of Conductor No./ Nominal Diameter of Conductor strands Nominal Thickness of Insultion Approx O.D Maximum DC Conductor Resistance Per Km @ 20oC+ Current Carrying Capacity 2 Cables Single Phase Unenclosed Clipped # Packing
(Sq.mm) (Strands/mm) (mm) (mm) (ohms/km) (Amps)
FF001620XX 0.50 16/0.20 0.60 2.15 39.00 4 100 mtrs in polybags + 180 mtrs project packs in polybags
FF002420XX 0.75 24/0.20 0.60 2.35 26.00 8
FF003220XX 1.0 32/0.20 0.70 2.55 19.50 12
FF003025XX 1.5 30/0.25 0.70 2.80 13.30 15
FF005025XX 2.5 50/0.25 0.80 3.45 7.98 20
FF005630XX 4.0 56/0.30 0.80 4.10 4.95 32
FF008430XX 6.0 84/0.30 0.80 4.70 3.30 42
FF008040XX 10 80/0.40 1.00 6.20 1.91 46 100 Mtrs standard packing poly-wrapped + higher sizes available on request in poly-wrapped or wooden drum, depending on size and lenght of the cable
FF012640XX 16 126/0.40 1.00 7.10 1.21 63
FF0196/40XX 25 196/0.40 1.20 8.65 0.780 80
FF027640XX 35 276/0.40 1.20 9.75 0.554 103
FF039640XX 50 396/0.40 1.40 11.70 0.386 139
FF036050XX 70 360/0.50 1.40 13.20 0.272 215
FF047550XX 95 475/0.50 1.60 15.25 0.206 260
FF060850XX 120 608/0.50 1.60 16.90 0.161 305
FF075050XX 150 750/0.50 1.80 18.80 0.129 356
FF092550XX 185 925/0.50 2.00 20.70 0.106 417
FF122150XX 240 1221/0.50 2.20 23.40 0.0801 502
FF152550XX 300 1525/0.50 2.40 26.20 0.0641 588
* The number and diameter of conductor strands are for reference only # As per IS 3961 ( Part - V ):1968 + Conductor resistance as per IS 8130:2013 is the governing criterion Conductor Class 5 as per IS 8130:2013 Replace XX in part number with colour code: Red=RD, Yellow=YW, Blue=BE, Black=BK, Green=GN, Grey=GY and White=WE