Agro Fort
submersible winding wires
submersible winding wires insulation
insulation and conductor
insulation and conductor
Bunched conductor
conductor
Cross section
submersible winding wires
Cubmersible winding wires insulation
Insulation and Conductor
Insulation and Conductor
Bunched Conductor
Conductor
Cross Section

AgroFort wires are made using ETP grade copper conductors with 101% conductivity having more than 99.97% purity. These copper conductors are further drawn and annealed to 110% of standards set under IS 8783:1995 and IS 694:2010.

AGROFORT WINDING WIRES

AgroFort Winding Wires are ideal for usage in submersible pump motors. The copper conductor of these wires is wrapped with a high quality polyester film and biaxially oriented polypropylene films. Like all wires and cables from the Fortis brand, AgroFort Winding Wires are ultra soft for easy winding and possess excellent electrical, mechanical, thermal and chemical properties.

testing

Our quality assurance teams carry out tests on each and every coil before it is dispatched to ensure a hassle-free experience. All tests carried out conform to IS 8783 (Part 4/Sec 3):1995.

AgroFort Flat Cables offer three kinds of protection, making them a better and a safer option.

ROHS compliant

AgroFort meets the standards prescribed by the European Union with regard to the restrictions on the use of hazardous substances in electrical and electronic equipment. In other words, there is no release of hazardous substances from these wires, thereby eliminating any danger to human health and to the environment.

anti-termite & anti-rodent

AgroFort wires come with termite and rodent repulsion properties, thus eliminating the possibility of short circuits that can otherwise cause tremendous loss of property and even human life.

Dual Coated Insulation & Dual Coated Sheath

In the case of submersible pumps, the area of installation is physically restrictive and the environment is hostile. Inferior quality insulation can lead to greater leakage of current from the live conductor, which can pose a major safety threat.

That’s why Fortis uses a dual coat for both insulation and sheath. This results in a much lower level of leakage than the prescribed limits, which in turn prevents shocks and short circuits and makes it possible to use underground, underwater or on wet surfaces.

usage guidelines

Submersible wires are delicate. To ensure the smooth running of the motor, the following points need to be adhered to:

  1. Do not place the coils near sharp objects as this may tear the insulation.
  2. Always store the wires at room temperature.
  3. Avoid stacking more than 5 coils as the excess weight may damage the lower most coil.
  4. Do not force the wire into the motor slot with tools like hammers or crowbars. The wires, being flexible, can be inserted manually into the stator slot.
  5. Properly wire-joint the winding coil with the flat cables to avoid motor failure.
  6. Avoid repeated testing as the wires have already been subjected to stringent quality checks. Megger tests are the only tests that need to be carried out at the customer’s end.

technical SPECIFICATIONS for winding wires

Size in mm R/DD in mm L/DD in mm Normal Conductor Resitance at 20oc Ω/KM copper Elongation % Appmotor Range HP (R/OD) Weight Kg/Km (L/OD) Weight Kg/Km
0.40 0.80/40 0.70/30 136.20 26 1.00 1.476 1.335
0.50 0.90/40 0.80/30 87.46 28 1.50 2.155 1.980
0.60 1.00/40 0.90/30 58.91 29 2.00 2.995 2.800
0.70 1.10/40 1.00/30 44.50 29 3.00 3.958 3.821
0.80 1.20/40 1.00/30 33.91 30 4.00 5.112 4.925
0.90 1.30/40 1.20/30 26.62 30 5.00 6.312 6.188
1.00 1.40/40 1.30/30 21.60 32 7.50 7.697 7.570
1.10 1.50/40 1.40/30 17.63 32 10.00 9.254 9.145
1.20 1.60/40 1.50/30 14.94 33 12.50 10.894 10.769
1.30 1.70/40 1.60/30 12.87 33 15.00 12.702 12.578
1.40 1.90/50 1.80/40 10.95 34 15.00 14.910 14.785
1.50 2.00/50 1.90/40 9.62 34 20.00 17.105 16.980
1.60 2.10/50 2.00/40 8.54 35 25.00 19.250 19.124
1.70 2.20/50 2.10/40 7.20 35 25.00 21.715 21.600
1.80 2.30/50 2.20/40 6.28 35 30.00 24.225 24.090
1.90 2.40/50 ... 5.76 36 30.00 26.850 ...
2.00 2.50/50 ... 5.20 36 40.00 29.644 ...
2.10 2.60/50 ... 4.94 36 50.00 32.714 ...
2.20 2.70/50 ... 4.50 36 50.00 35.63 ...